Wenger 28x16 Stage Only
Banner Package Install Options
Client to provide banners of SuperFlag material or 60% textilene/40% blow through with our dimensions below
Top Banner 28' W x 3' H
Grommets on all 4 corners & top/bottom every 2 feet
Material must be SuperFlag or 60% textilene 40% blow through
Inside Stage 26' W x 7' H (MAX Dimension - Can be made smaller)
Grommets on all 4 corners & top every 2 feet
Recommend that sponsor info be on top 3 or 4 feet, as backline will hide bottom 3 or 4 feet
Material may be Vinyl (least expensive) or SuperFlag or 60% textilene 40% blow through material
Stage Skirt 28' W x 3' H
Grommets on top every 2 feet
(additional options available)
with 4x4 sound wings 38' W x 3.5' H
with 4x8 sound wings 46' W x 3.5' H
Material may be Vinyl (least expensive) or SuperFlag or 60% textilene 40% blow through material
Banner Package Install Options
Client to provide banners of SuperFlag material or 60% textilene/40% blow through with our dimensions below
Top Banner 28' W x 3' H
Grommets on all 4 corners & top/bottom every 2 feet
Material must be SuperFlag or 60% textilene 40% blow through
Inside Stage 26' W x 7' H (MAX Dimension - Can be made smaller)
Grommets on all 4 corners & top every 2 feet
Recommend that sponsor info be on top 3 or 4 feet, as backline will hide bottom 3 or 4 feet
Material may be Vinyl (least expensive) or SuperFlag or 60% textilene 40% blow through material
Stage Skirt 28' W x 3' H
Grommets on top every 2 feet
(additional options available)
with 4x4 sound wings 38' W x 3.5' H
with 4x8 sound wings 46' W x 3.5' H
Material may be Vinyl (least expensive) or SuperFlag or 60% textilene 40% blow through material
Apex 32x24 Stage Only
Banner Package Install Options
Client to provide banners of SuperFlag material or 60% textilene 40% blow through with our dimensions below. We need the blow through for the PA behind the vertical banners and for safety with wind. Please add two hours to our build time. You may commence installing your lights while we set up our hardware, zip ties, additional grommets, and attach banners.
Top Banner
32’ wide x 51” tall - 32 feet wide x 51 inches tall
Grommets on top and bottom of banner every two feet, Grommets on both sides every one foot.
Vertical Side Banners
4' feet wide x 25' feet long and
No sponsor names or words to be printed on the top two feet and bottom two feet as it gets wrapped around a pipe and will not be seen. They should just extend the color and artwork to the ends of the banner, just nothing important. Total of 21 feet of your Sponsor's message will be seen. No grommets on the top, bottom or sides of vertical banners.
These Top and Vertical banners CANNOT be done in vinyl which is not blow through. For safety reasons we are not allowed to install them in vinyl in these areas.
We recommend SuperFlag material. It may be reused for years and years, doesn’t wrinkle, takes color printing beautifully, is Very Light Weight and can be carried in a small rollaway luggage for other shows. The light weight aspect is clear if you have ever carried textilene banners. These banners may be textilene but can not attest for longevity or wrinkles.
Textilene would need to be 60% fabric and 40% blow through.
Bottom Skirt Banner - this May be done in vinyl which is less expensive and not see through.
48’ wide x 4’ tall. - 48 foot wide x 4 foot tall
The outer 8’ on each side will be wrapped around the sides of the stage and I would recommend you center the artwork for the front facing 32’ of the skirt, leaving the outer eight feet the same color but without lettering.
Large Grommets 3/4” center hole: every two feet along top only.
Please have the interior hole of the grommets be 3/4 inch so we can fit screws through the Grommets and screw into our stage adapter)
Banner Package Install Options
Client to provide banners of SuperFlag material or 60% textilene 40% blow through with our dimensions below. We need the blow through for the PA behind the vertical banners and for safety with wind. Please add two hours to our build time. You may commence installing your lights while we set up our hardware, zip ties, additional grommets, and attach banners.
Top Banner
32’ wide x 51” tall - 32 feet wide x 51 inches tall
Grommets on top and bottom of banner every two feet, Grommets on both sides every one foot.
Vertical Side Banners
4' feet wide x 25' feet long and
No sponsor names or words to be printed on the top two feet and bottom two feet as it gets wrapped around a pipe and will not be seen. They should just extend the color and artwork to the ends of the banner, just nothing important. Total of 21 feet of your Sponsor's message will be seen. No grommets on the top, bottom or sides of vertical banners.
These Top and Vertical banners CANNOT be done in vinyl which is not blow through. For safety reasons we are not allowed to install them in vinyl in these areas.
We recommend SuperFlag material. It may be reused for years and years, doesn’t wrinkle, takes color printing beautifully, is Very Light Weight and can be carried in a small rollaway luggage for other shows. The light weight aspect is clear if you have ever carried textilene banners. These banners may be textilene but can not attest for longevity or wrinkles.
Textilene would need to be 60% fabric and 40% blow through.
Bottom Skirt Banner - this May be done in vinyl which is less expensive and not see through.
48’ wide x 4’ tall. - 48 foot wide x 4 foot tall
The outer 8’ on each side will be wrapped around the sides of the stage and I would recommend you center the artwork for the front facing 32’ of the skirt, leaving the outer eight feet the same color but without lettering.
Large Grommets 3/4” center hole: every two feet along top only.
Please have the interior hole of the grommets be 3/4 inch so we can fit screws through the Grommets and screw into our stage adapter)